Aerospace Structures Assembler
LAUNCH Technical Workforce Solutions is seeking Aerospace Structures Assembler for an opportunity in Mesa, AZ
Team has openings to support fabrication of the P-8 Tail-Cones, F-18 Pylons & F-15 Launchers. The openings are for Precision Structures Assembly Technicians in Mesa, AZ. The selected candidates will assemble, modify and install aircraft structural assemblies, subassemblies, and structures on aircraft systems. Identify nonconforming parts, conditions and manufacturing processes.
Lays out, fabricates assembles, mates, installs and functionally tests, checks or troubleshoots, and repairs production and prototype aircraft structures, parts and assemblies, mechanical and pneumatic.
The position requires the successful completion of the Sheet Metal Airframe Repairer (SMAR) assessment after start
Assemble aircraft structures or aircraft support equipment with or without the aid of jigs and fixtures by drilling, filing, filling, reaming, countersinking, burring and fastening using various hand tools as well as electrical, hydraulic, and pneumatic equipment.
Work with engineering to improve manufacturing processes.
Shim, fit, trim and align structural assemblies and subassemblies that vary considerably from one assembly to another as with fairings and the mating of major assemblies; realign or replace ribs, bulkheads or stringers in skinned assemblies; establish from blue-prints with or without firm callouts, butt, station and water lines; blind pick up of hole locations for blank parts from existing structure; correcting skin canning conditions, buckles, wrinkles in outer skins and remove surface defects as assigned.
Assemble, install, rework, repair and modify aircraft structural, mechanical or electrical assemblies, subassemblies, components, systems, and airframe structures on aircraft systems following manufacturing planning, blueprints, schematics, process specifications, repair and rework sketches, written and oral instructions.
Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and nonconformance issues. Check units for compliance using handheld precision measuring equipment, such as calipers, micrometers, height gages and scales.
Report all non-conformances to manufacturing supervision or corrective action representative. Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality when required.
Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision.
Report on job status and restraints to coworkers and supervision
Identify production inefficiencies and suggests potential improvements to product or process.
This position is located in a location that does not offer relocation. Candidates must live in the immediate area or relocate at their own expense.
These positions must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. §120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location.
Basic Qualifications (Required Skills/Experience):
3+ yrs of experience in aerospace structures assembly
Experience interpreting and working from blueprints, sketches and written and verbal instructions, in English.
Ability to work any shift as required by business need.
Preferred Qualifications:
Able to work in confined spaces requiring kneeling, crawling, climbing, and bending.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Experience with aviation or military products and processes are a plus.
Experience with rigging and installation of operating mechanisms structures, or assemblies and parts, or related systems and equipment is preferred
Ability to work extended hours, overtime and weekends when necessary to support factory and operations activities.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.
Why Choose LAUNCH?
A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations.
LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.
If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights!
Lays out, fabricates assembles, mates, installs and functionally tests, checks or troubleshoots, and repairs production and prototype aircraft structures, parts and assemblies, mechanical and pneumatic.
The position requires the successful completion of the Sheet Metal Airframe Repairer (SMAR) assessment after start
Assemble aircraft structures or aircraft support equipment with or without the aid of jigs and fixtures by drilling, filing, filling, reaming, countersinking, burring and fastening using various hand tools as well as electrical, hydraulic, and pneumatic equipment.
Work with engineering to improve manufacturing processes.
Shim, fit, trim and align structural assemblies and subassemblies that vary considerably from one assembly to another as with fairings and the mating of major assemblies; realign or replace ribs, bulkheads or stringers in skinned assemblies; establish from blue-prints with or without firm callouts, butt, station and water lines; blind pick up of hole locations for blank parts from existing structure; correcting skin canning conditions, buckles, wrinkles in outer skins and remove surface defects as assigned.
Assemble, install, rework, repair and modify aircraft structural, mechanical or electrical assemblies, subassemblies, components, systems, and airframe structures on aircraft systems following manufacturing planning, blueprints, schematics, process specifications, repair and rework sketches, written and oral instructions.
Ensure all assemblies and detail parts are free of Foreign Object Debris (FOD) and nonconformance issues. Check units for compliance using handheld precision measuring equipment, such as calipers, micrometers, height gages and scales.
Report all non-conformances to manufacturing supervision or corrective action representative. Prepare rejection tags noting deviations from specifications on dimensions, finishes, material, processes, or quality when required.
Follow all safety procedures and reports unsafe conditions to safety officials or manufacturing supervision.
Report on job status and restraints to coworkers and supervision
Identify production inefficiencies and suggests potential improvements to product or process.
This position is located in a location that does not offer relocation. Candidates must live in the immediate area or relocate at their own expense.
These positions must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. §120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location.
Basic Qualifications (Required Skills/Experience):
3+ yrs of experience in aerospace structures assembly
Experience interpreting and working from blueprints, sketches and written and verbal instructions, in English.
Ability to work any shift as required by business need.
Preferred Qualifications:
Able to work in confined spaces requiring kneeling, crawling, climbing, and bending.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Experience with aviation or military products and processes are a plus.
Experience with rigging and installation of operating mechanisms structures, or assemblies and parts, or related systems and equipment is preferred
Ability to work extended hours, overtime and weekends when necessary to support factory and operations activities.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.
Why Choose LAUNCH?
A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations.
LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.
If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights!
